<b id="i2rle"><form id="i2rle"></form></b>
    1. <source id="i2rle"><meter id="i2rle"></meter></source> <tt id="i2rle"></tt>

        <b id="i2rle"><tbody id="i2rle"></tbody></b>
        1. 當前位置:首頁-常見問題解答>>激光標簽制作廠家:汽車標簽紙怎樣貼不起氣泡

          激光標簽制作廠家:汽車標簽紙怎樣貼不起氣泡

          來源:http://www.apersianrug.com/ 日期:2019-06-06 發布人:admin   激光標簽制作廠家:汽車標簽紙怎樣貼不起氣泡
            Manufacturer of Laser Label: How Can Car Label Paper Not Stick Bubbles
            目前市面大尺寸汽車標簽紙,普通帶有一層透明膜,小尺寸普通不需求透明膜,撕下直接粘貼即可。
            At present, large-size automobile label paper on the market usually has a transparent film, and small-size ordinary does not need transparent film, tear off and paste directly.
            但是怎樣粘貼才會不起氣泡呢,這是很多愛車的朋友都十分關懷的問題。
            But how to paste it without bubbles? This is a problem that many car-loving friends are very concerned about.
            1、首先清洗車身,抹潔凈,堅持枯燥。汽車標簽紙粘貼過程盡量在室內停止,防止在室外灰塵粘貼在貼紙上。
            1. First, clean the car body, wipe clean, insist on boring. The sticking process of automobile label paper should be stopped indoors as far as possible to prevent dust from sticking on the sticker outside.
            2、其次檢查貼紙完好并肯定好貼紙位置,粘貼之前往粘貼部位平均的噴灑一層水(運用帶有噴嘴的工具),我們行業叫做水貼法,其作用是減少在粘貼過程起氣泡的幾率,并且關于不理想的粘粘位置可再次挪動。
            2. Second, check that the sticker is in good condition and confirm the position of the sticker. Before pasting, spray an average layer of water on the sticker (using the tool with nozzle). Our industry is called water pasting method. Its function is to reduce the probability of bubbles in the pasting process, and the unsatisfactory sticking position can be moved again.
            激光標簽制作廠家
            Manufacturer of Laser Label
                                           激光標簽制作廠家
            3、再次先把透明膜(連同貼紙)一邊扯開,固定好位置先從一邊貼上去,同時用布或者塑料卡刮平外表,邊貼邊抹平邊撕底紙,直到貼完,若在粘貼中途呈現大量氣泡可重新撕起來再貼。
            3. Pull the transparent film (together with the sticker) apart at the same time, fix it on one side, scrape the surface with cloth or plastic card, and tear the base paper at the same time, until it is finished. If there are a lot of bubbles in the middle of the sticker, it can be re-torn up and then pasted.
            4、汽車標簽紙全部貼好后,再用布或者塑料卡重復向邊緣刮壓有氣泡部位,由于貼紙與車身外表之間有層水汽并未完整粘牢,刮壓時氣泡很容易溢出。
            4. After all the automobile label paper is affixed, the air bubbles are repeatedly scraped to the edge with cloth or plastic card. Because there is a layer of water vapor between the sticker and the outside of the automobile body, the air bubbles easily overflow during scraping.
            激光標簽制作廠家:汽車標簽紙怎樣貼不起氣泡,若粘貼位置不理想,可漸漸挪動貼紙的位置到合適,同樣道理,貼紙與車身之間有層水汽此時并未完整粘牢。等候大約半個小時,待貼紙與車身之間的水完整枯燥后貼紙會自動粘牢,把透明膜撕下即可。
            Laser label manufacturer: How can the automobile label paper not stick bubbles? If the sticking position is not ideal, it can gradually move the position of the sticker to the right place. Similarly, there is a layer of water vapor between the sticker and the car body, which is not completely adhered at this time. Waiting for about half an hour, when the water between the sticker and the car body is completely dry, the sticker will automatically stick and tear off the transparent film.

          上一篇:山東透明不干膠標簽印刷中常用哪些粘膠劑?
          下一篇:透明不干膠標簽卷筒孔位偏差怎么處理?
          聯系我們
          最新亚洲中文字幕|久久996re热这里只有精品无码|日韩欧美中文字|97久久国产亚洲精品超碰