<b id="i2rle"><form id="i2rle"></form></b>
    1. <source id="i2rle"><meter id="i2rle"></meter></source> <tt id="i2rle"></tt>

        <b id="i2rle"><tbody id="i2rle"></tbody></b>
        1. 當前位置:首頁-新聞中心>>公司公告>>不干膠防偽標簽印刷,對多層標簽制作標準的改善

          不干膠防偽標簽印刷,對多層標簽制作標準的改善

          來源:http://www.apersianrug.com/ 日期:2020-07-13 發布人:shengfeng 當前,不干膠標簽已經滲透到人們生活的方方面面。但是,傳統不干膠標簽存在的缺陷也日益凸顯,例如,口紅管、眼影管、指甲油瓶、香水瓶等瓶體細小的容器及其他有特殊要求的包裝,由于粘貼標簽的地方有限,不能全面記錄產品信息,造成了標簽的局限性。
          At present, self-adhesive label has penetrated into all aspects of people's life. However, the defects of traditional self-adhesive labels are also increasingly prominent. For example, lipstick, eye shadow tube, nail polish bottle, perfume bottle and other small containers and other special requirements packaging, because of the limited place of stickers, can not fully record product information, resulting in the limitations of labels.
          在這種情況下,多層標簽應運而生,并廣泛應用于化妝品、醫藥、化工及食品等領域。多層標簽將信息印制到不同層的標簽紙上,在底紙與各層標簽紙上設置有硅油層與膠黏層,再將不同層的標簽紙進行重疊、復合、模切。形成的多層標簽因設置了硅油層可以分層揭開,并通過膠黏層粘貼于產品上。產品信息記錄在各層標簽紙之上,有效地拓展了標簽信息記錄空間,解決了傳統不干膠標簽信息記錄空間不足的問題。
          In this case, multi-layer label emerges as the times require, and is widely used in cosmetics, medicine, chemical and food fields. The multi-layer label prints the information to different layers of label paper. Silicon oil layer and adhesive layer are set on the bottom paper and each layer of label paper, and then the different layers of label paper are overlapped, compounded and die cut. Finally, the multi-layer label can be opened layer by layer because of the silicon oil layer, and is pasted on the product through the adhesive layer. The product information is recorded on each layer of label paper, which effectively expands the label information recording space and solves the problem of insufficient recording space of traditional self-adhesive label information.
          多層標簽雖然有其優勢,但是,使用現有工藝生產的多層標簽剝離時找不到剝離切入點,或者剝離切入點剝離困難,剝離后上層紙與下層紙徹底分離,一分為二,不能成為一個有效的整體標簽,為標簽的使用帶來了諸多不便,存在著一定的不足。因此,對多層標簽生產工藝進行改進,解決多層標簽在以上使用過程中存在的缺陷,非常必要。
          Although the multi-layer label has its advantages, the multi-layer label produced by the existing technology can not find the cut-off point, or it is difficult to peel off the cut-off point. After stripping, the upper paper and the lower paper are completely separated, and one is divided into two, which can not become an effective overall label, which brings a lot of inconvenience to the use of the label, and there are some shortcomings. Therefore, it is very necessary to improve the multi-layer label production process and solve the defects in the above use process.
          剝離困難?增設小翼片
          Is it difficult to separate? Add wing piece
          針對以往多層標簽初始剝離困難的問題,青島三慧增設了一個方便剝離的小翼片。
          In view of the difficulty in the initial stripping of multi-layer labels, Qingdao Sanhui has added a small wing to facilitate stripping.
          首先,根據人們日常選擇初始剝離點的習慣,將初始剝離點確定在標簽右下端,即各層標簽紙相連接一端的對面偏下方,如圖所示,像字母“Q”的小尾巴。其次,這個小翼片在各層標簽紙印刷、復合完畢后模切出來,消費者在剝離標簽紙時會自然而然地捏住小翼片進行剝離。
          First of all, according to people's daily habit of selecting the initial stripping point, the initial stripping point is determined at the lower right end of the label, that is, the opposite side of the end of each layer of label paper connected, as shown in the figure, like the small tail of the letter "Q". Secondly, the small wing is die-cut after each layer of label paper is printed and compounded. Consumers will naturally hold the small wing to peel off the label paper.
          對多層標簽工藝的精進
          Improvement of multi-layer label technology
          但是,因為小翼片是幾層標簽紙復合在一起的,捏住小翼片時幾層標簽紙會一起同底紙分離,仍然不能實現逐層剝離開。
          不干膠防偽標簽印刷
          However, because the small wing is composed of several layers of label paper, when the small wing is pinched, several layers of label paper will be separated from the bottom paper together, and it is still unable to peel off layer by layer.
          為解決“問題中的問題”,青島三慧把更下層標簽紙的小翼片在模切后去掉,如圖中紅色箭頭所示,而次下層的小翼片仍舊保留。這樣捏住小翼片進行剝離時,就可以方便地對更下層標簽紙和次下層標簽紙分別進行剝離了。對于兩層以上的多層標簽,該工藝需要從更下層標簽紙開始呈階梯式地不同程度地切斷小翼片,從而達到使標簽逐層剝離的目的。
          In order to solve the "problem in the problem", Qingdao Sanhui removed the small wing of the bottom label paper after die cutting, as shown by the red arrow in the figure, while the small wing of the lower layer was still retained. In this way, it is convenient to peel off the bottom label paper and the second lower label paper by holding the small wing for stripping. For the multi-layer label with more than two layers, the process needs to cut off the small wings step by step from the bottom label paper, so as to achieve the purpose of stripping the label layer by layer.
          避免整體分離?看如何層間處理
          Avoid overall separation? How to deal with inter layer
          多層不干膠標簽包括一層底紙和至少一層的標簽紙,所有標簽紙的反面均為膠黏層,膠黏層亦可進行標簽內容的印刷,標簽紙的層數可根據具體產品內容來定。更下層標簽紙反面的膠黏層與底紙相復合,使用標簽時直接粘貼在產品上。
          The multi-layer self-adhesive label includes a bottom paper and at least one layer of label paper. The reverse side of all label papers is adhesive layer. The adhesive layer can also print the label content. The number of layers of label paper can be determined according to the specific product content. The adhesive layer on the back of the bottom label paper is combined with the bottom paper, and the label is directly pasted on the product.
          為解決標簽整體分離的問題,更下層標簽紙正面左端未印刷標簽內容的部分,留出一小部分區域不設置硅油,其余區域設置硅油。次下層標簽紙與更下層標簽紙復合后,在設置硅油層的區域,兩層標簽紙可順利地剝離,而未設置硅油層部分不能剝離。這樣通過硅油加工工藝,將兩層標簽紙有效地連接在了一起,實現了多層標簽可剝離查看而又不會整體分離的目的。
          In order to solve the problem of label separation as a whole, a small part of the area without label content printed on the left side of the bottom label paper is not provided with silicone oil, and the rest areas are set with silicone oil. After the secondary layer label paper is combined with the bottom layer label paper, the two layers of label paper can be peeled off smoothly in the area with silicon oil layer, but the part without silicon oil layer cannot be peeled off. In this way, through the silicone oil processing technology, the two layers of label paper are effectively connected together, and the purpose of multi-layer label can be peeled off for inspection without overall separation.
          關于不干膠防偽標簽印刷http://www.apersianrug.com就先介紹到這里了,相信大家在實際的工作中會用到相關知識,如果您有這方面的需要,歡迎前來選購。
          On the printing of self adhesive anti counterfeiting label http://www.apersianrug.com First of all, I believe that you will use the relevant knowledge in the actual work, if you have the need in this respect, welcome to buy.

          上一篇:不干膠防偽標簽印刷,不干膠貼紙上的裂痕應該注意哪些?
          下一篇:標簽打印軟件是如何進行不干膠防偽標簽設計?
          聯系我們
          最新亚洲中文字幕|久久996re热这里只有精品无码|日韩欧美中文字|97久久国产亚洲精品超碰