<b id="i2rle"><form id="i2rle"></form></b>
    1. <source id="i2rle"><meter id="i2rle"></meter></source> <tt id="i2rle"></tt>

        <b id="i2rle"><tbody id="i2rle"></tbody></b>
        1. 當前位置:首頁-新聞中心>>公司公告>>不干膠防偽標簽印刷,為什么不干膠貼紙會出現溢膠?

          不干膠防偽標簽印刷,為什么不干膠貼紙會出現溢膠?

          來源:http://www.apersianrug.com/ 日期:2020-11-03 發布人:shengfeng 1.貼紙材料性能分析:在生產前應該與材料供應商咨詢相關性能特點,選擇適合您的加工工藝的材料。
          1. Performance analysis of sticker material: before production, you should consult the material supplier about the relevant performance characteristics and select the material suitable for your processing technology.
          2.不干膠貼紙加工、存儲環境控制:貼紙加工及存儲環境溫度應控制在攝氏23+/-3 度的范圍,濕度應控制在相對55+/-5%的范圍,過高的溫濕度會提高粘膠劑的流動性
          2. Self adhesive sticker processing and storage environment control: the temperature of sticker processing and storage environment should be controlled within the range of 23 ℃ + / - 3 ℃, and the humidity should be controlled within the relative range of 55 + / - 5%. Too high temperature and humidity will improve the fluidity of adhesive
          3.不干膠貼紙加工工藝控制:應避免在標簽加工過程中存在對標簽的滑動摩擦。
          3. Process control of self-adhesive stickers: sliding friction on labels should be avoided in the process of label processing.
          透明不干膠標簽印刷廠家
          4.標簽模切質量控制:必須使用鋒利的刀具對標簽進行模切,鈍角刀刃會對標簽粘膠劑形成翻擠,導致在模切過程中標簽邊緣溢膠現象。過深的模切壓力也會對標簽粘膠劑形成過度擠壓,過淺的模切壓力可能會造成在模切過程中粘膠劑的拉絲現象,從而在標簽邊緣或標簽表面形成溢膠。因此,模切刀的選擇是關鍵。
          4. Label die-cutting quality control: the label must be die-cut with a sharp tool. The obtuse angle blade will cause the label adhesive to be overturned, resulting in the label edge overflow phenomenon in the die-cutting process. Too deep die-cutting pressure can also form excessive extrusion on the label adhesive, and too shallow die-cutting pressure may cause the phenomenon of glue drawing in the process of die-cutting, thus forming overflow on the label edge or label surface. Therefore, the selection of die-cutting tool is the key.
          5.不干膠貼紙復卷張力控制:過大的復卷張力對標簽粘膠劑過度形成擠壓,甚至造成標簽在底紙上的滑移,會造成標簽的溢膠。
          5. Rewinding tension control of self-adhesive stickers: excessive rewinding tension will squeeze the adhesive of label excessively, even cause the label to slip on the backing paper, which will cause the label to overflow.
          有了不干膠防偽標簽印刷上面的小總結,希望對廣大客戶有所幫助,如果有什么不理解的或者尋求幫助的請點擊我們的網站:http://www.apersianrug.com或者來電咨詢,我們會盡全力為您解決
          With the self-adhesive anti-counterfeiting label printing above the small summary, I hope to help the majority of customers, if you do not understand or seek help, please click our website: http://www.apersianrug.com Or call consultation, we will try our best to solve it for you

          上一篇:不干膠防偽標簽印刷,防水標簽紙種類有哪些你知道嗎?
          下一篇:不干膠防偽標簽印刷,封口標簽常見的種類有哪些?
          聯系我們
          最新亚洲中文字幕|久久996re热这里只有精品无码|日韩欧美中文字|97久久国产亚洲精品超碰