<b id="i2rle"><form id="i2rle"></form></b>
    1. <source id="i2rle"><meter id="i2rle"></meter></source> <tt id="i2rle"></tt>

        <b id="i2rle"><tbody id="i2rle"></tbody></b>
        1. 當前位置:首頁-新聞中心>>企業動態>>科普 | 關于不干膠標簽印刷的小知識

          科普 | 關于不干膠標簽印刷的小知識

          來源:http://www.apersianrug.com/ 日期:2019-11-21 發布人:admin
          不干膠標簽印刷
            不干膠是指以紙張、薄膜或其它特種資料為面料,反面涂有膠粘劑,以涂硅維護紙為底紙的一種復合資料為材質印刷的印刷品,在產品方式方面為復合資料單頁印刷品,反面涂有膠粘劑,能夠粘合在客戶需求粘合的場所。
            Self adhesive refers to a kind of composite material printed with paper, film or other special materials as the fabric, adhesive on the back, and silicon coated maintenance paper as the bottom. In terms of product mode, it is a single page composite material printed with adhesive on the back, which can be glued to the place where customers need gluing.
            所謂不干膠印刷,就是在一定的壓力下將油墨等物質經印版轉移到反面預涂有膠層的承印資料外表的過程。
            The so-called self-adhesive printing is the process of transferring ink and other substances to the surface of substrate with adhesive layer on the reverse side through the plate under a certain pressure.
            No.1 不干膠的印刷方式
            No.1 printing method of adhesive
            1.膠印
            1. offset printing
            膠印是我國標簽印刷廠印刷紙質不干膠的主要方式。膠印的特性是圖文精密,層次豐厚,適于大批量印刷,且印刷設備可一機多用,合適中國標簽市場的特性。膠印可印制較厚的塑料資料,如模內標簽、標簽吊牌,但必需給機器加裝uv固化安裝。
            Offset printing is the main way for label printing factory to print paper adhesive. The characteristics of offset printing are precise graphics and text, rich layers, suitable for mass printing, and the printing equipment can be used in one machine, suitable for the characteristics of the Chinese label market. Offset printing can print thick plastic materials, such as in mold labels and label tags, but it is necessary to add UV curing installation to the machine.
            2.網印
            2. screen printing
            網印是對承印物順應性更廣的印刷方式。網印標簽墨色濃厚,平面感強,可采用uv油墨印制薄膜產品。除了屈指可數的幾種輪轉網印設備可勝任卷到卷標簽印刷外,大局部網印設備為半自動平面網印機,只能印刷單張產品,套印精度不高,不合適與消費線配套的薄膜標簽消費設備。
            Screen printing is the most adaptable printing method to substrate. The screen printing label has strong ink color and strong sense of plane, so UV ink can be used to print film products. In addition to a few rotary screen printing equipment, most of the screen printing equipment is semi-automatic flat screen printing machine, which can only print single sheet products. The overprinter accuracy is not high, and it is not suitable for the film label consumer equipment matching with the consumer line.
            3.柔印
            3. Flexography
            柔版印刷主要在北美地域比擬盛行。 其設備是中小型機組式印刷單元,以水墨為主,采用卷到卷印刷,圓壓圓模切方式,具有消費效率高、工藝先進及契合環保請求等特性。
            Flexographic printing is mainly popular in North America Its equipment is a small and medium-sized unit type printing unit, mainly ink-based, roll to roll printing, round pressing and die-cutting, with high consumption efficiency, advanced technology and environmental protection requirements.
            4.凸印
            4. relief printing
            凸版印刷以亞太地域為主。亞太地域的開展中國度居多,標簽印刷還比擬落后,即便是采用凸版印刷,但運用UV油墨設備的僅占少數,大局部標簽印刷仍運用樹脂型油墨、卷到卷印刷和單張紙印刷方式共存。由于人工貼標比例較高,所以單張紙膠印不干膠標簽的應用普遍。在模切方式上以平壓平模切為主。
            Letterpress is mainly in Asia Pacific region. The development of Asia Pacific region is mostly in China, and label printing is relatively backward. Even if letterpress printing is used, only a few of UV ink devices are used. Most label printing still uses resin ink, roll to roll printing and sheet paper printing. Due to the high proportion of manual labeling, single sheet paper offset sticker is widely used. In the die-cutting mode to press flat die-cutting.
            5.凸印+柔印
            5. Embossing + Flexography
            這種加工方式多在歐洲,柔版印刷的應用狀況根本同于美國,凸版印刷也占有50%的比例,且凸版印刷全部運用UV油墨,設備多數為層疊式或衛星式。資料加工方式同樣為卷到卷印刷。
            This kind of processing method is mostly used in Europe. The application of flexographic printing is basically the same as that of the United States. Letterpress also accounts for 50% of the total, and all letterpress printing uses UV ink. Most of the equipment is laminated or satellite type. Data processing method is also roll to roll printing.
            No.2 不干膠的印刷流程
            No.2 printing process of adhesive
            不干膠標簽印刷屬于特種印刷,普通狀況下其印刷和印后加工是在標簽機上一次完成的,即多道加工工序在一臺機器的幾個工位上完成。由于是聯機加工,因而不干膠標簽印刷質量的控制是綜合性的印刷和加工問題,要從以資料的選擇、設備的配置和調控以從工藝道路的制定等方面綜合思索和施行。
            Self adhesive label printing belongs to special printing. In general, its printing and post printing processing are completed on the label machine at one time, that is, multiple processing procedures are completed on several stations of a machine. As it is online processing, the quality control of self-adhesive label printing is a comprehensive printing and processing problem, which should be comprehensively considered and implemented in terms of the selection of materials, the configuration and control of equipment, and the formulation of process road.
            選擇原資料時,一定要選用高質量、各項理化指標均合格的不干膠資料,而不要選用過時或理化指標不穩定的產品。由于后者固然價錢低,但由于這類資料質量不穩定,在各工序耗費大,以至招致設備無法正常加工,在糜費了原資料的同時還糜費了大量的人力、物力,結果廢品標簽的加工本錢并不一定低。
            When selecting the original data, it is necessary to select the high-quality adhesive data with qualified physical and chemical indexes rather than the outdated or unstable products. Because the latter is low in price, but because of the unstable quality of this kind of data, it costs a lot in each process, which leads to the failure of normal processing of equipment. It also costs a lot of manpower and material resources while wasting the original data. As a result, the processing cost of waste labels is not necessarily low.
            No.3 不干膠印刷工藝
            No.3 self adhesive printing process
            1.印前處置
            1. Prepress disposal
            在印前處置方面,很多客戶設計的訂單都是以膠印或凹印方式為主的,這種原稿假如采用柔性版印刷,樣張會呈現很多質量問題,如顏色不到位,層次不明顯,呈現硬邊等。因而,要處理此類問題,印前及時溝通是十分必要的。
            In prepress processing, many orders designed by customers are mainly offset or gravure printing. If flexible printing is adopted for this kind of original, many quality problems will appear on the sample sheets, such as the color is not in place, the level is not obvious, and the hard edge will appear. Therefore, to deal with such problems, it is necessary to communicate in time before printing.
            2.板材選擇
            2. Plate selection
            在柔性版版材的選擇上也十分有技巧。印刷企業的制版人員,對版材的運用、網線版的制造、層次的過渡、網點的增大補償、印版的伸縮率等問題需求充沛理解。這樣不只有利于消費,也能夠控制好質量參數,防止人為干擾,減少了毛病的產生。
            In flexible plate material selection is also very skilled. The professional plate makers in printing enterprises need to fully understand the use of plate materials, the manufacturing of screen and line plates, the transition of layers, the increase and compensation of outlets, and the expansion rate of plates. This is not only conducive to consumption, but also can control the quality parameters, prevent human interference and reduce the generation of defects.
            3.設備選擇
            3. Equipment selection
            由于標簽印刷的特殊性,窄幅柔性版印刷設備相關于凸印及其他類型的柔性版印刷設備來講有突出的特性,窄幅柔性版印刷設備不只操作簡單,印刷質量及操作效率高,組合性強,能做更多品種的產品,更具競爭實力。
            Due to the particularity of label printing, the narrow flexo printing equipment has outstanding characteristics with respect to embossing and other types of flexo printing equipment. The narrow flexo printing equipment is not only simple to operate, but also has high printing quality and efficiency, strong combination, can make more varieties of products, and has more competitive strength.
            科普小結
            Summary of popular science
            隨著人們生死水平的不時進步,不干膠印刷市場不時擴展,商標、貼紙、標牌、銘板的市場占有率日趨增大,這為不干膠印刷帶來了無限商機。
            With the constant progress of people's life and death level, the self-adhesive printing market expands from time to time, and the market share of trademarks, stickers, signs and nameplates is increasing, which brings infinite business opportunities for self-adhesive printing.

          上一篇:不干膠防偽標簽都有哪些特性?
          下一篇:產品防偽標簽有哪些防偽識別技術
          聯系我們
          最新亚洲中文字幕|久久996re热这里只有精品无码|日韩欧美中文字|97久久国产亚洲精品超碰