<rp id="u1r2i"></rp>
  1. <rt id="u1r2i"></rt>

    <rp id="u1r2i"></rp>

  2. <cite id="u1r2i"><span id="u1r2i"></span></cite>
    1. <rp id="u1r2i"><menuitem id="u1r2i"></menuitem></rp>
        <rp id="u1r2i"><meter id="u1r2i"></meter></rp><rt id="u1r2i"><menuitem id="u1r2i"></menuitem></rt>

          <source id="u1r2i"><nav id="u1r2i"></nav></source>
          當前位置:首頁-新聞中心>>企業動態>>激光防偽標簽制作流程必須經過這些步驟嗎?

          激光防偽標簽制作流程必須經過這些步驟嗎?

          來源:http://www.apersianrug.com/ 日期:2021-05-10 發布人:admin 1.設計稿件、出菲林:泛彩溢設計防偽標識,出菲林;
          1. Design manuscript and film: Design anti-counterfeiting logo and film;
          2.色盲片:制作生產激光全息防偽母版用的色盲片;
          2. Color blind film: to produce color blind film for laser holographic anti-counterfeiting master plate;
          3.做小版:根據設計稿件及菲林圖案上激光拍版房制作小版(一般是單枚標簽);
          3. Make a small version: make a small version (usually a single label) according to the design manuscript and the laser plate room on the film pattern;
          4.電鑄:用做好的小版去電鑄,得到金屬小版 (金屬小樣);
          4. Electroforming: Electroforming with the prepared small plate to obtain the metal small plate (metal sample);
          5.拼版:金屬小版上拼板機拼出制作防偽標識用的大版;
          5. Make up: on the small metal plate, the large plate for making anti-counterfeiting marks is made by the plate machine;
          6.再電鑄:大版電鑄出全息防偽母版,及工作版(上模壓機器用);
          6. Re electroforming: large plate electroforming holographic anti-counterfeiting master, and working plate (used for molding machine);
          7.模壓:工作版通過模壓機器把圖案壓印到PET鍍鋁基膜上;
          7. Molding: the pattern of the working plate is imprinted on the pet aluminized base film by the molding machine;
          8.曬網:再出菲林曬網為印刷刮刮層準備;
          激光標簽制作廠家
          8. Screen drying: the film screen drying is prepared for the printing scratch layer;
          9.啤孔,打碼:啤孔,打表面碼;
          9. Beer hole, marking: Beer hole, marking surface code;
          10.涂膠:打碼以后產品上膠,根據客戶的要求及被貼物不同選擇不用膠型(油膠,上膠,原膠等);
          10. Gluing: after marking, the product should be glued, and the non gluing type (oil gluing, gluing, original gluing, etc.) should be selected according to the customer's requirements and the pasted objects;
          11.上刮刮銀:下一工序之前要晾干刮刮銀,不然下一工序無法完成;
          11. Upper scraping silver: dry the scraping silver before the next process, otherwise the next process cannot be completed;
          12.刮刮銀上面印刷字,如:“刮涂層 輸密碼 辨真偽”;
          12. Scraping the printed words on the silver, such as "scraping the coating and inputting the password to distinguish the true from the false";
          13.模切:按照企業要求制作刀模,模切成各種形狀規格的防偽標簽;
          13. Die cutting: according to the requirements of the enterprise to make knife mold, die cutting into various shapes and specifications of anti-counterfeiting labels;
          14.排廢:把模切后多余的紙排掉。
          14. Waste discharge: discharge the excess paper after die cutting.
          15.質檢:非常重要的一步,通過質檢把不合格品去除,補回合格產品,數量不夠就需要重復操作上面有些步驟,保證防偽標簽送到客戶手中都是好的;
          15. Quality inspection: it is a very important step to remove the unqualified products through quality inspection and replace the qualified products. If the quantity is not enough, we need to repeat some steps above to ensure that the anti-counterfeiting labels are delivered to the customers;
          16.入庫:防偽標簽制作完成。
          16. Warehousing: the production of anti-counterfeiting label is completed.
          購買產品重要的是質量,選擇商家選擇是誠信,激光標簽制作廠家真誠的為廣大客戶提供優良的服務,歡迎大家在網站:http://www.apersianrug.com下方留言咨詢.
          The most important thing to buy products is quality, and the choice of business is integrity. Laser label manufacturers sincerely provide excellent services for customers. Welcome to visit our website: http://www.apersianrug.com Below message consultation

          上一篇:不干膠標簽印刷對于UV油墨印刷應該注意什么?
          下一篇:最后一頁
          聯系我們
          精品国产中国久久